Hardware products Chain Sling with Affordable Price

Material: Alloy Steel-g80
Surface:  Yellow zinc plated (galvanized ,hot dip galvanized ,black,other clolor painting also available)
Size:According to clients' needs

Packing: Bag with pallet, chain drum,wooden case
Process: Welding, flash butt weld

1. Type of sling to be used - endless, single, two, three or four leg.
   2. Capacity - the sling must be both long enough and strong enough for the load and the slinging method.
   3. Apply the mode factor for the slinging method.
   4. For use at temperatures exceeding 100°C or below minus 40°C refer to the suppliers instructions.
   5. Where slings may come into contact with acids or chemicals consult the supplier.
   6. In the case of multi-leg slings the angle between the legs should not be less than 30° or exceed the maximum marked.
   7. Multi-leg slings exert a gripping force on the load which must be taken into account, this increases as the angle between the legs increases.
   8. Due to the possibility of sparking, the use of aluminium is restricted in certain classified atmospheres, so ensure the ferrule is suitable for such conditions.